Colortek FLOORGUARD Systems Guide

Offering best-in-class performance and the ultimate protection for concrete floors, the Colortek range of Industrial Paints & Coatings has been specifically developed to comply with the most demanding requirements, especially when it comes to durability, mechanical strength and chemical resistance.

STEP 1: First things first, Fill & Prime!


SX2 FILLWELL- Maximum Strength
Solvent-free Epoxy Filler & Grout
Repairing and filling any imperfections and irregularities no matter their thickness in both walls and floors substrates before overcoating with epoxy systems.

• Hygienic Properties
• High Strength
• No shrinking
• Waterproof

SXO PRIMEWELL- High Penetration
Clear Epoxy Primer
Designed to penetrate deeper into the concrete pores in order to achieve a better mechanical bond between the substrate and the epoxy coating.

• Improves adhesion of epoxy coats to concrete
• Reduces bubbles and pinholes formation
• Allows concrete to achieve a higher dry film thickness and coating uniformity

SX9 HUMIGUARD - Vapor Barrier 
Anti-Humidity Primer 
Moisture-tolerant epoxy primer suitable for high humidity areas or concrete that has not fully dried from being cleaned or acid etched.

• Prevents ground moisture from surfacing
• Improves adhesion of epoxy coats to concrete

STEP 2: Now onto the Epoxy Coatings System! Choose your pick from the below:


SX1 TOUGHGUARD - Good Resistance 
Light to Medium Traffic Areas 
A general purpose epoxy used for industrial maintenance works in malls, hotels, villas and building garages. SX1 is also used as a top coat to renovate tubs and tiles on metal surfaces! 

• Good abrasion resistance
• Good chemical resistance 
• Optimum protection
• Resin rich

SX5 WORXGUARD - Excellent Resistance 
Medium to High Traffic Areas 
A high build, self-leveling epoxy paint designed to protect concrete substrates in warehouses, factories, research laboratories, car parks, etc. 

• Solvent-free
• Odor-free
• Excellent chemical resistance
• Excellent abrasion and impact resistance 

SX50 INDUSTRYGUARD - Outstanding Resistance 
Heavy Traffic Areas 
A high-build, self-leveling epoxy coat designed to protect concrete substrates in factories, warehouses, airport workshops and car parks.

• Solvent-free
• Odor-free
• High solid content
• Excellent chemical, abrasion and impact resistance.

SX90 STATICGUARD - Anti-Static
Electrostatic Discharge (ESD) 
Designed for controlling ignition risk in areas exposed to flammable solvents and vapors, this epoxy paint is used in rooms containing volatile chemicals or sensitive electronic components. 

• Precise ESD performance and protection
• Excellent impact, abrasion and chemical resistance
• Meets ANSI/ESD S20.20-2014 ESD Association Standard for the Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment.

SX60 HEALTHGUARD - Anti-Bacterial
Enhanced Hygienic Properties 
An anti-microbial epoxy paint designed to protect floors where strict hygienic control is essential such as processing plants, pharmaceutical industries, laboratories, hospitals, industrial kitchens, etc. 

• Inhibits microbial growth
• Odor-free
• Non-toxic
• Self-leveling and high-build
• Excellent chemical, abrasion and impact resistance

SX70 RAMPGUARD - Excellent Resistance for Inclined Surfaces
Special Viscosities and Performance Properties.
An extreme high-build epoxy designed to ease application on ramps and inclined surfaces with an inclination of up to 20%.

• High-build
• Solvent-free
• Excellent abrasion, chemical and impact resistance 

SX80 SCREEDGUARD - Excellent Resistance 
Impact and Chemical Resistant Floor
An extreme high-build epoxy screed designed to provide an impervious, hard-wearing, impact and mechanical resistant floor. Screedguard is suitable for locations subject to extreme loads including chemical process areas, steelworks, food and drink manufacturing areas, etc.

• Heavy duty dense surface
• Outstanding mechanical properties
• Solvent-free

OXIBOND 4420 - UV & Friction Resistance
PU Protective Top Coat 
UV and Friction- resistant polyurethane top coat used to provide ultimate protection to epoxy finishes against rubber tires and UV rays in areas such as roof car parks, garages and warehouses.

• Flexible top coat
• Exceptional resistance to oil and grease
• Dirt pick-up resistance

STEP 3: A Couple Additives and a Touch of Color! 

Anti-skid Additive 
- An additive that is broadcasted on the wet coat to attain a rough anti-skid, added grip texture.
Light Reflective Additive
- Highly transparent beads that can be added to the wet surface, thus allowing for better visibility at night and in low light conditions.
Colortek Tinting System
- Adding Color and life to epoxy coatings using Colortek's high-quality tinting machines.